How to install Windows 10

Now we will discuss about how to install Windows 10. We have taken the necessary steps to install Windows 10 on your computer. Whether you are install Windows 10 on a computer for the first time, upgrading an older version of Windows. Just want to do a clean installation on a computer that already has Windows 10.

We teaches you how to install Windows 10 on your PC. How to install Windows 10 on your PC, you must press and hold a key while starting Windows, which will launch a menu that allows you to start a computer with the Windows 10 installer from a USB drive or CD/DVD.

If you only want to install updates from Windows 7, 8 or 8.1. If you follow the instructions below about the Windows 10 installation tool, you will start the update by running your Windows already. No programs supported by Windows 10 can be dropped.

Ensure that your device meets the minimum system requirements

For the latest version of Windows 10, you will need the following:

  1. Internet Connection: Require an Internet connection during setup.
  2. Storage: 32GB space or more
  3. CPU: 1GHz or faster supported processor
  4. RAM: 1 GB for Windows 10 32-bit or 2 GB for Windows 10 64-bit
  5. GPU: DirectX 9 compatible or later with WDDM 1.0 driver
  6. Display: 800×600 resolution or greater

How to install Windows 10 | InfinityGyan

Create Installation Media

Microsoft has a tool specifically for creating installation media. You can download this tool by using this link, or by going to this page and selecting “Download Download Tool” under the title “Windows 10 Installation Media”.

To insert Windows 10 installation files you will need a blank USB drive with at least 8GB of space (or a blank DVD).

For this, you must run the device, accept Microsoft teams, and then choose “Create installation media for another PC”.

You will select the language and version of Windows you want, whether it is 32-bit or 62-bit, and then select the type of media you want to use.

Installing from a USB drive is the easiest, but you can find details on using DVD and ISO files here.

You then select your USB drive from the list of drives, and the device will download the required files and place them on the USB drive.

How to install Windows 10 | InfinityGyan

Note: If you are upgrading a Windows 7 or Windows 8.1 PC, you can actually use this tool only to download and install Windows 10 on your computer. Just run the program as an administrator, and when do you want to “do”? Select “section,” Upgrade this PC now “, and follow the remaining steps in the tool. It will also give you the option to keep your files and apps during the installation process. You can find more detailed instructions on this. Process here.

Use the installation media

Insert your installation media into the computer on which you plan to install Windows 10, then access your computer’s BIOS or UEFI.

This is the system that allows you to control certain aspects of your computer’s hardware, and it is built into your motherboard.

This step is unique to your specific hardware, so we cannot show you exactly what you need to do.

However, you should find the process of accessing it by visiting your computer or motherboard manufacturer’s website.

Accessing a computer’s BIOS or UEFI usually involves holding, often refraining, F1, F2, F12, or deleting a specific key during the boot process.

Therefore, find out which key your computer uses, then turn it off. Boot it back, and hold down the required key as soon as it starts booting.

Change Your Computer’s Boot Order

In your computer’s BIOS or UEFI, you need to find the setting for boot order.

It can appear in a section called “Boot” or “Boot Order”. It decides which devices are used when the computer is started.

The computer will not boot into the Windows 10 installation tool until this drive is turned on, more in boot order than the drive holding the computer’s current operating system.

You should have the drive (this should be your USB drive or DVD drive) at the top of the boot order menu.

If your computer uses it, you may have to disable Safe Boot.

Save Settings and Exit BIOS/UEFI

Your computer should now boot into the Windows 10 installation tool, which will guide you through the process of installing Windows 10 on your computer.

How to boot windows 10 installer

Step 1: To install Windows 10, your Windows 10 installation file must be loaded onto a disk or flash drive, to ensure that your Windows 10 installation media is connected.

If you have not yet downloaded the Windows 10 installation tool, follow the instructions from this Microsoft Support page:

Step 2: Open the Start menu. In the lower-left corner of the screen, either click on the Windows icon, or press Win key.

Step 3: Click on the power icon. Which is in the lower-left corner of the start window.

Step 4: Click on restart. Doing so will restart your computer.

Step 5: Press Del or F2 to enter the setup. This key can also be a separate key, most computers will display a message at startup that says.

“Press [key] to setup”, so watch this message when your computer is restarted to confirm the key that you must press to access the BIOS.

Consult your computer’s manual or online help page to confirm your computer’s BIOS key.

Step 6: Navigate to the Boot tab. The boot tab can instead say boot options depending on the manufacturer of your computer.

Step 7: Select a device from which to boot. You have a few options here:

  • For USB flash drives, choose the Removable Device option.
  • For disk installation, choose the CD-ROM drive option.

Step 8: Press the + key until your boot option is first. So your computer will choose your choice as your default boot option.

Step 9: Save your settings. You should see a big prompt at the bottom of the screen that is related to “Save and Exit”, press it and save your settings and restart your computer.

You may have to press Enter ↵ to confirm the changes.

Step 10: Wait for your computer to restart. Once your computer restarts, you will see a window here with your geographic data.

Now you are ready to start your Windows 10 installation.

How to install Windows 10

  1. Click Next when prompted. If necessary, you can also change the options on this page before continuing.
  2. Click on install Now.
  3. Enter your Windows 10 key, then click Next. If you do not have a Windows 10 key, click in the lower-right corner of the screen instead.
  4. Click on the “Accept” box and click on Next. This will indicate that you accept the Terms of Use.
  5. Click on upgrade.
  6. You can click Custom instead of cleaning Windows 10 on your computer. Doing so will give you an indication of selection before segmentation.
  7. Wait for Windows 10 to be installed. This process can range from half an hour to several hours.
  8. If prompted to press a key to boot from a CD, do not press the key.
  9. Follow the on-screen setup instructions. Once Windows 10 is installed on your computer, you will be able to customize its settings.

Once you complete this process, you will be taken to the desktop of your computer. You can also click on Express Settings to install Windows 10 with recommended settings.

Read More:

Leave a Comment